中文版 English Pусский Français
Tel:+8618865912025
Your current location:Home > Products > Fish feed processing line > Text

Expanded Fish Feed Processing Line/ Puffed Fish Feed Production Line/ Floating F

Related presentations

1.       Expanded fish feed

In order to meet modern fish farms development, most of modern fish feed is made by twin-screw (or single screw) extrusion production line, which is called expanded fish feed. Adopting cereals, vegetable proteins, vitamins, minerals, fish meal and fish oil as raw materials, and adopting dry-type or wet-type extrusion as manufacturing technique, expanded fish feed is made for both carnivorous and graminivorous fishes. Compared with traditional fish feed, expanded fish feed has the advantages: (1) easier feeding management (2) lower wastage rate (3) lower water contamination (4) higher feed nutritional ingredient use ratio (5) longer storage time. Expanded fish feed improves digestibility and refined the balance of nutrients to match the needs of the different species of fish more precisely at different periods of development. At the same time, expanded fish feed improves the sustainability of the ingredients used. Based on the advantages, expanded fish feed will replace traditional fish feed in the future.

2.       Expanded fish feed samples introduction

2.1   Raw materials: corn meal, wheat flour, rice flour, corn starch, de-oil soya flour, fish meat (or waste), fish meal, animal oil, ash content, wheat bran, allicin, gunk, vitamins, minerals, food color etc.

2.2   Humidity: the moisture is no more than 15%.

2.3   Ups and downs properties: floating, half-floating, sinking.

2.4   Shapes: spherical (pellets), granular, columnar, acetabuliform, pisciform, or customrized.

2.5   Sizes: (1) diameter: from 1.5mm to 25mm(2) length: user-defined.


3.       Expanded fish feed processing lines description

3.1   Expanded fish feed processing lines features

3.1.1          Capacity range is large: our expanded fish feed processing lines capacity range is from100kg/hr to2500kg/hr. It can meet most fish farms and fish feed plant requirement.

3.1.2          Expanded fish feed processing line has wide raw materials application range. One of our users even adopts food rubbish as raw materials.

3.1.3          Our expanded fish feed processing lines’ extruders are twin-screw extruder, there is one couple of screws inside the barrel. The raw material of screws is 38CrMoAl (standard: GB/T 3077-1999). This material’s hardness and strength performance is excellent, which can bear high temperature and high pressure.


3.1.4          Our twin-screw extruder has self-clean function.

3.1.5          Our extruders, dryers and cutting machines (if any) are equipped with inverters. The inverters are famous brands (Delta, LS, ABB, Siemens etc.).

3.1.6          Our expanded fish feed processing line automation degree is high, it need only 2-4 workers to operate.

3.1.7          The production factors can be quantized and controllable.

3.1.8          Expanded fish feed processing line not only makes fish feed, it can be adopted to make the other feed (eg. bird feed, shrimp feed, pig feed) or pet food (eg. dog food, cat food) as well.

3.1.9          We can custom-make all the machineries for expanded fish feed processing line as per users’ requirement. We supply OEM goods.

3.1.10      Our twin-screw extruders are equipped with forced lubrication system. The driving method can be tape drive or direct-connected.

3.2   Expanded fish feed processing line work flow

3.2.1          Work flow: Raw material treatment---Extrusion---Drying---Flavoring---Packing & Detection


3.2.2          Machineries description in each process

3.2.2.1    Machineries in raw material treatment: (1) Grinder or grinding group (option), used for grinding raw materials. (2) Bone broken machine (option), used for broken big size raw materials into small size pellet. (3) Colloid grinder (option), used for grinding small size bone or meat into colloidal material. (4) Mixer (include propeller type mixer, vertical type mixer, dry powder type mixer), used for mixing all raw materials and adding appropriate water (don’t need to add water into dry powder type mixer), to make the raw materials uniform.

3.2.2.2    Machineries in extrusion: (1) Conditioner (option for small capacity lines, necessary for big capacity lines), used for pre-conditioning raw materials. (2) Twin-screw extruder, used for extruding and shaping.

3.2.2.3    Machineries in drying: different dryers. Our dryers’ heating power source can be electricity, gas-fired burner (Baltur,Italy), oil-fired burner (Baltur,Italy) or steam (from boiler). It is up to users’ local power situation.

3.2.2.4    Machineries in flavoring: (1) Flavoring hoister, used for hoisting self-finished feed and adding seasoner. (2) Oil sprayer, used for spraying oil on the surface of self-finished feed, make sticking seasoner easier. (3) Single drum, used for mixing self-finished feed and seasoner (ancillary use with flavoring hoister). (4) Double-drum, used for adding seasoner, and mixing it with self-finished feed.

3.2.2.5    Machineries in packing & detection (option): (1) Cup type packing machine, used for packing feed with small size bag by heat-seal. (2) Multi-head weigher packing machine, used for packing feed with medium size bag by heat-seal. (3) Big size bag packing machine, used for packing big size bags. (4) Weight detector, used for detecting the goods after packing. It can get rid of the finished product with unqualified weight. (5) Metal detector, used for detecting if there is any metal inside the bag and removing the unqualified one. (6) Weight and metal all-in-one detector, used for detecting both weight and metal, and removing the unqualified product.

3.2.2.6    The other machineries may be adopted: (1) Transport machineries, they are screw conveyor, air conveyor, cooling conveyor, hoister, vertical type bucket elevator, Z type bucket elevator, vacuum suction machine and negative pressure suction machine. They are used for conveying raw materials, self-finished product and finished product between the other machineries. (2) Vibrating screen (option), used for screening feed and removing dreg. (3) Stock bin (option), used for storing raw materials or finished product. (4) Boiler (option), used for supply steam to conditioner, extruder and dryer. Its power source (electricity, gas, oil) is due to user’s local power situation.

4.       Twin-screw fish feed extruders’ models and parameters (heated by electrical rings)

Type

Model

Capacity
(kg/hr)

Installed
Power
(kw)

Actual
Power
(kw)

Size
(mm)

Electricity Parameters

Dry

Method

TSE65-P

100-150

35

20-25

2600×870×1950

Dynamic

Control

TSE 70-P

200-300

63

45-55

2700×870×1950

3 Phase

50/60Hz

208/220/240/

380/400/415/

440/480V

1 Phase

50/60Hz

100/110/120/

127/137/220/

230/240V

TSE 85-P

300-500

92

75-80

4000×1200×2200

Wet

Method

TSE 90-P-I

800-1200

83.12

58-67

5300×1000×2550

TSE 90-P-II

1000-1800

98.12

69-79

5300×1000×2550

TSE 95/98-P-I

1200-2000

98.12

69-79

6000×1240×2850

InChina, single phase electricity is 220V/50Hz, three-phase electricity is 380V/50Hz.

TSE 95/98-P-II

1500-2500

118.12

83-95

6000×1240×2850

Leaving a message.
Name:
Contact:
Email:
Address:
Content:
Vvalidate: See?
Jinan Shengrun Machinery Co., Ltd.
0086-18865912025
0086-531-89654200
No. 18, Area 3, Xiaoluzhuang Industrial Park, Tianqiao, Jinan, China

Contact

Tel: 0086-531-89654200
Phone: 0086-18865912025
Site:http://www.chinashengrun.com/eng/
Address:No. 18, Area 3, Xiaoluzhuang Industrial Park, Tianqiao, Jinan, China